Reloading

Lee 7.62x54 russian case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 2.094 to 2.114 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell HolderCaliber:...

Grips the shell for a firm fit in the press during reloading or priming operations.Will fit the auto prime and auto prime ii.Capacity: 1 CasingType: Shell HolderCaliber: 32-20 WinSize: #6Quantity: 1Weight: 0.04 lbsFunction: Holds CasesCompatible With:...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the collet is so powerful it will form one.Type: Factory Crimp...

Lee's lube & size kit allows you to lubricate and size cast bullets.It can also seat and crimp gas checks.Intended for use on single stage presses only, the sizer die has standard 7/8 x 14 threads.Bullets are pushed through the sizing die nose first, so...

Lee's pacesetter 2-die set includes full length sizing die, bullet seating die, universal shell holder and instructions/load data.Type: Pacesetter LP Rifle Dies w/Shell HolderCaliber: 7.35 CarcanoDie Series: PacesetterIn Set: 2Metal Type: SteelShell...

Lee's loader is a complete reloading system, kit includes everything needed to reload your 303 british, except rubber mallet.Type: Lee Loader Rifle KitCaliber: 303 BritishIn Set: 1Shell Holder Cap: Included

Grips the shell for a firm fit in the press during reloading or priming operations.Universal shell holder used in most brands of reloading presses.Not for use with the auto-prime.Capacity: 1 CasingType: Shell HolderCaliber: 30 M1 CarbineSize:...

Lee's powder thru expanding die charges the case while expanding the case mouth.It is used with a powder funnel adapter or the auto disk or pro auto disk powder measure.Type: Powder Through Expanding Pistol DieCaliber: 38 S&WIn Set: 1Metal Type: Steel

Lee's pacesetter 2-die set includes full length sizing die, bullet seating die, universal shell holder and instructions/load data.Type: Pacesetter LP Rifle Dies w/Shell HolderCaliber: 264 Win MagDie Series: PacesetterIn Set: 2Metal Type: SteelShell...

Lee 7x57 mauser case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 2.215 to 2.235 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell HolderCaliber:...

Lee 7.62x39r case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 1.513 to 1.528 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell HolderCaliber: 7...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the collet is so powerful it will form one.Type: Factory Crimp...