Reloading

This two-die set is intended for reloading bottleneck cases, and consists of a full-length sizer die with an expander-decapping unit, and a seater die with bullet seater plug.The full-length sizer die brings the case to saami minimum cartridge dimensions...

Lee 35 rem case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trimtrim to length 1.900 to 1.920 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell HolderCaliber: 35...

Grips the shell for a firm fit in the press during reloading or priming operations.Universal shell holder used in most brands of reloading presses.Not for use with the auto-prime.Capacity: 1 CasingType: Shell HolderCaliber: 7.62x54R/8x56R HungarianSize:...

The rcbs universal primer arm 2 is designed for fast, accurate primer seating.Primer plugs and sleeves are included for large and small rifle and pistol primers.Changing sizes is fast and easy, taking less than 60 seconds.The arm fits rock chucker ii,...

These high-quality replacement parts are compatible with the rcbs rock chucker, reloader special and most c-frame single-stage presses.Type: Primer Plug, Sleeve & SpringCaliber: SmallSize: SmallQuantity: 1Compatible With: Most C-Frame Single-Stage...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the collet is so powerful it will form one.Type: Factory Crimp...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the collet is so powerful it will form one.Type: Factory Crimp...

This collet is designed be used with the rcbs standard bullet puller to remove bullets from a wide range of cases.Type: Bullet Puller ColletCaliber: 45 CalSize: StandardQuantity: 1Function: Pull BulletsCompatible With: RCBS Standard Bullet...

Lee's lube & size kit allows you to lubricate and size cast bullets.It can also seat and crimp gas checks.Intended for use on single stage presses only, the sizer die has standard 7/8 x 14 threads.Bullets are pushed through the sizing die nose first, so...

Lee 41 mag case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 1.270 to 1.290 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell HolderCaliber: 41 Rem...

This collet is designed be used with the rcbs standard bullet puller to remove bullets from a wide range of cases.Type: Bullet Puller ColletCaliber: 35 CalSize: StandardQuantity: 1Function: Pull BulletsCompatible With: RCBS Standard Bullet...

Rcbs case trimmer pilot is tapered to guide pilot into the case mouth.The design prevents a case from wobbling when being trimmed to length.Note: this item is for use with rcbs trim pro case trimmers, rotary case trimmer, 2 rotary case trimmer, and rcbs...