Reloading

Grips the shell for a firm fit in the press during reloading or priming operations.Will fit the auto prime and auto prime ii.Capacity: 1 CasingType: Shell HolderCaliber: 38-40 Win/44-40 WinSize: #14Quantity: 1Weight: 0.04 lbsFunction: Holds...

This two-die set is intended for reloading bottleneck cases, and consists of a full-length sizer die with an expander-decapping unit, and a seater die with bullet seater plug.The full-length sizer die brings the case to saami minimum cartridge dimensions...

Lee 35 rem case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trimtrim to length 1.900 to 1.920 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell HolderCaliber: 35...

Grips the shell for a firm fit in the press during reloading or priming operations.Universal shell holder used in most brands of reloading presses.Not for use with the auto-prime.Capacity: 1 CasingType: Shell HolderCaliber: 7.62x54R/8x56R HungarianSize:...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the collet is so powerful it will form one.Type: Factory Crimp...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the collet is so powerful it will form one.Type: Factory Crimp...

This collet is designed be used with the rcbs standard bullet puller to remove bullets from a wide range of cases.Type: Bullet Puller ColletCaliber: 45 CalSize: StandardQuantity: 1Function: Pull BulletsCompatible With: RCBS Standard Bullet...

The rcbs standard bullet puller is designed to easily pull jacketed bullets without damaging them.It utilizes the standard 7/8-inch-14 thread and may be used in any single-stage reloading press with this thread.Type: Bullet Puller w/o ColletCaliber:...

Lee's lube & size kit allows you to lubricate and size cast bullets.It can also seat and crimp gas checks.Intended for use on single stage presses only, the sizer die has standard 7/8 x 14 threads.Bullets are pushed through the sizing die nose first, so...

Lee 41 mag case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 1.270 to 1.290 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell HolderCaliber: 41 Rem...

This collet is designed be used with the rcbs standard bullet puller to remove bullets from a wide range of cases.Type: Bullet Puller ColletCaliber: 35 CalSize: StandardQuantity: 1Function: Pull BulletsCompatible With: RCBS Standard Bullet...

This collet is designed be used with the rcbs standard bullet puller to remove bullets from a wide range of cases.Type: Bullet Puller ColletCaliber: 7mmSize: StandardQuantity: 1Function: Pull BulletsCompatible With: RCBS Standard Bullet PullerMaterial:...