Reloading

Lee red round die box, the perfect storage for your dies.Round box made of durable red plastic, holds three dies plus your universal shell holder and a dipper.Invert the bottom part of the box and store your 3-hole turret with your dies installed...

The load-all ii can be easily and economically converted to another gauge with the conversion kit.The entire die carrier is replaced so no adjustments are needed.The conversion kit includes the die carrier, steel sizer, wad guide, shell holder, load data...

The lee taper crimp dies hardened steel designed to overcome crimp problems caused by poor die design.These dies offer little or no advantage when used with 1986 or newer lee dies as the crimp angle is already modified taper crimp.Jacketed bullets must...

Lee replacement decapping pin for our universal decapping die.Capacity: 1 CasingType: Universal Decapping Replacement PinCaliber: AllSize: UniversalQuantity: 1Weight: 0.03 lbsFunction: Remove PrimerCompatible With: Lee Universal DecapperMaterial:...

Lee feed die and fingers converts the bullet feed kit to another caliber or length of bullet with the bullet feed kit accessory.This model is used for 45 cal bullets, with lengths from.50" up to.67" long.Type: Feed Die & FingersCaliber: 45 CalSize: Up to...

Lee 6mm rem / 244 rem case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 2.213 to 2.233 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell...

Grips the shell for a firm fit in the press during reloading or priming operations.Universal shell holder used in most brands of reloading presses.Not for use with the auto-prime.Capacity: 1 CasingType: Shell HolderCaliber: 32-20 WinSize: #6RQuantity:...

Lee 220 swift case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 2.185 to 2.205 inches.Capacity: 1 CasingType: Case Length Gauge w/Shell HolderCaliber: 220...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the collet is so powerful it will form one.Type: Factory Crimp...

The bullet feed kit is complete for one bullet diameter and range of length.To convert to another caliber or bullet length select appropriate feed die & finger.Capacity: 1 BulletType: Bullet Feed KitCaliber: 9mm - .365 DiaSize: Up to .46 LongQuantity: 1...

The lee taper crimp dies hardened steel designed to overcome crimp problems caused by poor die design.These dies offer little or no advantage when used with 1986 or newer lee dies as the crimp angle is already modified taper crimp.Jacketed bullets must...

Lee feed die and fingers converts the bullet feed kit to another caliber or length of bullet with the bullet feed kit accessory.This model is used for 9mm to.365 diameter bullets, with lengths from.46" up to.60" long.Type: Feed Die & FingersCaliber:...