Rigging

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-415-1T

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-408 UPC : 762799274085

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-410 UPC : 762799264109

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-407 UPC : 762799274078

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees.  Manufacturer : C. Sherman Johnson Manufacturer Part No : LS-2550

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks.  Manufacturer : C. Sherman Johnson Manufacturer Part No ...

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-406 UPC :...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook. Manufacturer : C. Sherman Johnson Manufacturer Part No : LS-2500

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1".  Manufacturer : C. Sherman Johnson Manufacturer Part No : 22-100

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin.Specifications:Pin-to-pin adjustment: 1-3/4″ to 3-5/8″Safe working load: 400 lbs. ...

Quick Release Lever - 5/16" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of...

Quick Release Lever - 1/4" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of...